New WSPR transmitter.

  

For some time I have been interested in the all-in-one type WSPR  transmitter. A fellow blogger Paul PA0K posts his WSPR adventures using the SOTAbeams WSPRlite model. This unit is no longer available and when I did a web search I found very few units on the market. The unit I  purchased was the Zachtek WSPR Desktop transmitter. The desktop transmitter has great reviews on Eham. The YouTube videos I watched about this product emphasized its compact size, works right out of the box, is easy to set up and can run independently without a PC. 

The unit I ordered was the 80m to 10m WSPR desktop. The package came from  Sweden and was at my door in under 6 days. Along with the Desktop device, you also get a USB to USB-micro cable and a GPS antenna with a 3m cord with an SMA connector. If you do plan to order one of these units be aware you will need an SMA to SO239 pigtail as it does not come with the unit. They can be ordered at Zachtek's website. Fortunately, I had one as it is used with my NANO VNA unit. 

Needed cable

Some of the selling points for me were:
- It's small size.
- Great reviews.
- Option to run it with or without a PC.
- Easy setup software available on Zachtek site.
- An LED light on the unit that indicates good or bad GPS lock, when transmitting and when idle.
- Automatic band switching.
- The unit is not affected by an extremely high SWR.

It was time to connect up the unit and I went to Zachtek and downloaded the operating software. I connected the unit to my PC via the USB to micro cable for the first time setup of the WSPR desktop, I connected the  GPS antenna and connected my Hustler 4BTV to the antenna port via the  SO-239 to SMA connector.  I entered my call in the box provided and selected the bands I wanted the unit to work on. As a side note, there is also a download for USB to serial driver but I already had that and it was working with no problems with my NANO VNA. I then pressed the start button on the software. I was supposed to see GPS information and the device status. Instead, I saw absolutely nothing.

Nothing happened

 I tried changing the USB port I was using, I then downloaded and installed the USB to serial driver from Zachtek as maybe it was a more up-to-date driver. I tried again and nothing happened. I know my NANO VNA has no issues working on my PC and using the USB to serial port driver, maybe a Win10 update messed things up. I connected the NANO VNA via its USB cable and it came to life. I then plugged the VNA into the same port the WSPR desktop was plugged into and it worked fine. I plugged the NANO VNA into the cable that came from Zachtek and the NANO VNA refused to start! I  plugged the WSPR desktop into the NANO VNA USB cable and the unit came to life. The device status came up and the GPS showed connection status. The issue was the USB-Micro cable from Zachtek it was defective right out of the box. I informed Zachtek of this a few days ago but as of yet, I have not heard back. 

The unit sprang to life

 

 Once the cable issue was solved the unit worked like a dream. In my next post the result of a 24-hour WSPR run with my Hustler 4BTV as well why the heck did I get this thing and how is it going to help my contesting adventures?

Antenna radiation pattern using WSPR

In a previous post, I mentioned I had purchased a Zachtek WSPR desktop transmitter. I found a great site one can use to go over the data collected regarding your WSPR transmissions. The site is called Grafana  GUI and can be accessed at the WSPR live site. The Grafana dashboard gives you information on solar weather from 5 minutes to 1 year.   Station-specific information such as antenna radiation pattern, spot data per band and time, map of where your signal is heard and finally it can be used for receiving and transmitting signals. I use the TX  data as I do not yet have a stand-alone WSPR receiver. There is a ton of information you can gather, my advice is to visit the site and look around. I ran my WSPR transmitter for almost 24 hours and below I  have included the Kp index for that time period as well as the antenna radiation pattern of my Hustler 4BTV. 

Click on all pictures to enlarge. 

CQ WW WPX CW contest outlook

 

 I have been running my WSPR desktop unit for almost 24 hours to get a better feel for band conditions ahead of this weekend’s CQ WW WPX contest. The bands I focused on were 10m, 15m, 20m, and 40m, using my Hustler 4BTV antenna. The results showed that 40m and 20m have been the strongest bands, while 15m has been relatively weak and 10m has been virtually non-existent. The evening hours appear to be when band activity really picks up and could provide my best opportunity for strong run rates. We’ll see how it all plays out, because before you know it, Sunday evening will be here and another contest will be in the books.

 

Snapshot of 10m conditions

The ARRL 10m contest happens this weekend (I got the date correct this time), and as we all know, 10m can be a band full of surprises. I once again put my ZachTek WSPR desktop transmitter to work for 24 hours. Below is a snapshot from Wednesday 19:00 UTC to Thursday 19:00 UTC. 

The graphs indicates that 10m becomes active around  1100 UTC, peaking at 14:00 UTC and staying decent until 21:00, when the band begins its fast closing for the day. 

Antenna pattern of the Hustler 4BTV

 

Kp index at the time

 

The band begins to open at 11:00 UTC

The Band peaks at 14:00 UTC

The band begins its sharp drop off starting at 21:00